The Right Companies To Do The Job

Tag: bathtub refinishing

Common Mistakes in DIY Bathtub Refinishing

Making the choice to go the Do-It-Yourself (DIY) route in bathtub refinishing is commendable. First of all, bathtub refinishing is not a simple process by any means. Not a lot of people would attempt to do it. They wouldn’t want to take such huge risks with their bathtub.

However. There are those who are bold enough to do it. And since you’ve always fancied yourself to be a DIY guy, you’ve decided to go for it. Still, you’ll have to recognize that there’s a danger there. You need to accept the fact that you could make mistakes.

What are those potential mistakes? Take a look at some of the most common mistakes from Bathtub Refinishing Grapevine TX in DIY bathtub refinishing.

Not Preparing the Tub Properly

A lot of DIY practitioners make the mistake of not preparing the tub properly before starting any work on it. There’s actually a lot of work to do before you even get to actually working on the tub. First of all. Make sure that you remove all of the hardware from your tub, such as faucets and drain rings. After the hardware is removed, scrub the tub down thoroughly. Sand the tub with the use of fine-grit sandpaper several times over before cleaning the tub to make sure that there’s no dust or dirt left. All of this is to guarantee that the finish will be very smooth once everything is finished. And it’s part of the preparation before the actual refinishing is done.


Fading in the color is one of the most common mistakes when it comes to DIY bathtub refinishing. It’s not a good look and certainly would make the tub look as though it hadn’t gone through the refinishing process at all. The possible reason for the fading? It happens when the coating that will be used for refinishing is mixed too thinly. Another possible reason for fading is when the wrong materials are mixed. When the coating is too thinly mixed, then eventually some of the tub’s original surface is going to show. 

Not Enough Drying Time

Another common mistake that’s often made in DIY bathtub refinishing is not allowing for enough drying time. This is what you should do after you’re done with the entire process of preparing your bathtub. It involved cleaning, sanding, and then cleaning again. The bathtub should be given a few hours to dry properly. You’ll have to be absolutely sure that there is no more moisture left as it will likely interfere with the refinishing process and you don’t want that. One possible problem is that the new coating might not even adhere when you apply it. 

Refinishing your own bathtub is not a walk in the park. Even if you’ve got a little experience, it’s still not going to be easy. Mistakes are just waiting to happen and seem to be just around the corner so the need to be extra-careful is huge. Knowing some of the most common mistakes in DIY bathtub refinishing will help you and other homeowners be aware of and capable of avoiding them.

How to Refinish Your Bathtub the DIY Way

Everyone seems to be into DIY these days. DIY, as you probably well know, means Do-It-Yourself and it can be about almost anything. Although it’s usually most used to describe something that’s done within the home. Like fixing your own roof, flooring, or your own bathtub, for example.

Arlington TX Bathtub

Now bathtub refinishing isn’t easy. It’s quite complicated especially for beginners, but then most DIY projects are like that. Anyone who wants to DIY their bathtub refinishing project better be ready for the challenges that it will have. If you want to do it, then you could use some guidance to pull it off.

So here are the steps from Bathtub Refinishing Arlington TX that would ultimately show you how to refinish your bathtub – the DIY way:

Step #1 – Clean the Bathtub

The first step is to make sure that your bathtub is clean. In many ways, this is the most important step since none of the things that you’ll do afterward will matter much if you don’t clean it properly at the start.

To start, remove all of the hardware from the bathtub. Do not forget to include the caulk in the things that you’re going to remove. In order to clean your bathtub as thoroughly as possible, use a decreaser.

Step #2 – Start Repairing the Chips

You’ll need to start repairing the chips in your tub. Since your tub has been in use for years, it’s bound to have chips on it and it could have a lot. 

For the repair, you’ll need to mix a two-part epoxy filler. Mix it until the epoxy is able to form a paste-like consistency. 

Use a putty knife to apply the epoxy in order to fill any chips that your bathtub might have. To remove any excess epoxy, use the putty knife to scrape it away. This will help reduce the sanding time later on.

Step #3 – Take Care of Rough Spots

After the epoxy has hardened, you can start smoothing out any rough spots that you see in the bathtub. Use a utility knife for the purpose. And if you don’t have that, you can also use sandpaper or orbital sander.

Step #4 – Scrub the Bathtub

Time for you to scrub the bathtub. For that purpose, you will need to use either sandpaper or steel wool. Scrub the bathtub three times and in between the scrubbings, vacuum the surface as well.

Step #5 – Cover Some of the Areas

Cover the areas that need to be specifically protected in the bathtub. There are several ways to cover those areas. You could use paper, tape, or a drop cloth for the purpose.

Step #6 – Start Applying the Paint

To get the best results for your bathtub refinishing projects, you will need to apply paint to your bathtub. Use an air compressor to spray paint the bathtub with the color of your choice. If you are not able to spray paint your tub, then using a paintbrush is also an effective way to do it. Apply a second coat after letting the first coat dry for 15 to 20 minutes.

This simple guide on how to refinish your bathtub the DIY way will allow you to do the process correctly and get the results you want.

Pros and Cons of Bathtub Refinishing

You and your bathtub are at an important point in your relationship. After many years of being together, you have to accept the fact that your bathtub is already worn and old. Things can’t continue as they are at present. You’re left with two major options. Either you refinish or you replace your bathtub.

dallas bathtub refinishing
Dallas Bathtub Refinishing

The truth is that you’re favoring bathtub refinishing over replacement. You were of that mind when you found out that the replacement process is going to cost a lot more. That’s why you decided to explore the possibility of refinishing your bathtub more. But you decided that you’d want to look at its pros and cons first.

What are the pros and cons of bathtub refinishing? Check out this article from Bathtub Refinishing Dallas TX which is very helpful. Please read on to find out as we start with the pros.

Pros of Bathtub Refinishing

These are the major reasons why you need to go for bathtub refinishing:

1. Refinishing is More Affordable

Refinishing is the more affordable option, especially when compared to buying a new one. Even though the actual price of a new tub isn’t that high, the entire process of bathtub replacement is what will make it go through the roof. Refinishing will allow you to save a little more when it comes to the costs.

2. You Can Change the Color of Your Bathtub

It’s easy enough to change the color of your bathtub through refinishing. Some colors are no longer in vogue and you want to be more updated. This is particularly true for bathtubs that are quite old. You need an update and refinishing will be able to give it to you.

3. Refinishing Takes Less Time

Refinishing isn’t going to take up too much time. Time is always precious and it needs to be used wisely, even in refinishing your bathtub. It would be done in as fast as a day or two. Replacing your bathtub will take a far longer time than that. So for the sake of convenience, you’d want a much quicker option and that’s refinishing.

Cons of Bathtub Refinishing

On the other hand, these are some of the reasons why you might think twice before going for refinishing:

1. Not Going to Last as Long as a New Bathtub

Refinishing might result in nice-looking tubs but it’s not going to last long. At least, not as long as getting a new one as a replacement. A new one will last for decades while a refinished bathtub is only good for about 10 to 15 years at the most.

2. Uses Harsh Chemicals

Another downside to refinishing is the use of harsh chemicals. Now, this can be a real problem since it can affect a person’s health. When you buy a replacement bathtub, then this issue will not be a problem at all. 

3. Can Only be Done Once

Refinishing can usually happen only once. After that, you’ll likely need to buy a new replacement. Of course, when it comes to replacing your old bathtub, there is no limit to how many times you can do that. You can replace it once every couple of years if you want to.

These are some prime examples of the pros and cons of bathtub refinishing. We can add to this list, but these are some of the most important ones that need to be talked about.

Why You Should Choose Bathtub Refinishing

Is your bathtub already old and damaged? The question is, what exactly should you do to your old bathtub? Replacing it is very tempting since you’re going to get a sparkling new bathtub instead of the old and worn-down one.

But is that really the best option on the table for you? 

As it turns out, there’s another option that’s just as good and in many ways is even better than replacement. That option is bathtub refinishing.

Keller Bathtub Refinishing

Below we are going to talk about why you should choose bathtub refinishing over any other option.

It Costs Less Than a Bathtub Replacement

Refinishing your bathtub is a sure way to save on costs. It’s a more affordable way of getting to use a great bathtub again rather than simply replacing it with a new one. The cost of replacing your old one with a brand new bathtub is quite high and it doesn’t end with the purchase of the new tub. There’s a lot more to it of which the plumber’s fee is just one. On the other hand, refinishing is not going to cost more than getting a new one. So given a choice, you can choose to find a refinishing company like Keller Bathtub Refinishing and it will save you money even in the long run. For those who don’t have the budget to buy a brand new tub, refinishing is as good an option as they could get.


Reducing one’s carbon footprint is the right thing to do. Choosing refinishing over replacing your bathtub is actually going to help you with that aim. It is the more environment-friendly choice over purchasing a new tub entirely. First of all, you’re not going to get rid of your old bathtub as it will only end up in a landfill somewhere. The impact that you are going to have on the environment is reduced considerably. In the end, you help save the planet while also having your good old bathtub upgraded.

A Longer Life for Your Bathtub

Refinishing is going to help your bathtub extend its lifespan. Yes, a longer life for your bathtub is very possible if you simply choose to refinish over replacing it with a new one. The truth is that refinishing could help extend the life of your bathtub for a lot of years. In some cases, it can last for as much as 20 years, which is probably something that you never thought was possible. Of course, you’ll need to do your part and that’s to use and maintain the tub as carefully as you can.

Bring Old Fixtures Back to Life

The fixtures of your old bathtub are likely to have broken or inefficient fixtures on them. You can solve that through refinishing. This will also help you save on extra costs since broken fixtures need to be replaced with new ones. But if your tub is refinished, then there’s no longer any need to purchase any replacement fixtures. 

There you go, so there’s no need to panic if your bathtub is already old and damaged. Especially if you’re a little short on budget, you could simply choose to refinish. These reasons help you see why you should choose bathtub refinishing over any other option.

Powered by WordPress & Theme by Anders Norén