The Right Companies To Do The Job

Category: Local Business

Your DIY Guide to Hardwood Installation

To go full DIY on any home improvement project is to go on an adventure. It might not always be smooth sailing, but it will always be exciting. That latter part is certainly for sure, whatever the project. So if you ever choose to go down that route, you better be ready for anything.

Dallas Hardwood Floors
Dallas Hardwood Floors

Like when you decide to go DIY with installing your hardwood flooring. Hardwood is one of the most popular materials used for flooring and with good reason. It offers several benefits that few other materials can match. Hardwood Floors Dallas looks great and is durable at the same time. 

But what’s the process of installing it on a DIY basis? How do you go about it if it’s solely on your own? Check out your DIY guide to hardwood installation.

Tools

  • Tape Measure
  • Pry Bar
  • Drill Bits
  • Ear Protection
  • Staple Gun
  • Variable Speed Drill
  • Hammer
  • Chop Saw
  • Table Saw
  • Chalk Line
  • Nail Set
  • Safety Goggles

Materials

  • Hardwood
  • Modular Porch System Kit
  • Pneumatic Flooring Package
  • Vapor Barrier Paper
  • Wood Putty

The Process

This is the process that you need to follow for a successful DIY installation of your hardwood flooring:

STEP #1 – Choose the Hardwood

The first step is to choose the hardwood species and board widths that will be used for the DIY installation.

STEP #2 – Measure the Space

You’ll need to measure the space the hardwood will be installed. If it’s your bedroom, measure its length and width to get the area. 

STEP #3 – Check Out the Sub-Floor

Next, check out the sub-floor. You need to make sure that the floor is not squeaky. If there is, screw a long drywall screw into the joist and sub-floor where the squeaking is. 

STEP #4 – Start Rolling Out the Vapor Barrier Paper

Start rolling out the strip of vapor barrier paper. You’ll have to allow an overlap of at least 4”. Staple it securely to the sub-floor.

STEP #5 – Start With the Installation Process

Start installing at the longest unobstructed wall in the room. The shoe molding needs to be removed and a chalk line that’s ⅜” from the baseboard needs to be made.

STEP #6 – Place the Boards

Start placing the boards. Choose a long one for the first row. Align the board’s edge with the clark line. Drill holes through the hardwood plank and into the sub-floor and joist. 

STEP #7 – Hand Nail Each of the Rolls

Once the first few rows are installed, drill pilot holes into the tongue of each board. Hand nail the rolls until enough clearance is achieved for the pneumatic nail gun.

STEP #8 – Staple the Boards

Use the pneumatic nail gun and then strike firmly using the mallet to drive the staple into the hardwood plank’s tongue. 

STEP #9 – Cut the Baseboard

Choose a piece that’s going to fit and leave 10 to 12 inches before cutting it off. The other piece should be used for the start of the next row.

STEP #10 – Fill the Gaps

Always cut the wall end of the wood so that the groove that fits to the tongue is not cut off.

STEP #11 – Put the Last Board Into Place

Fit the last board into place but leave a ⅜” gap at the end wall. This space is for expansion and contraction purposes.

STEP #12 – Fill All the Holes With Wood Putty

Fill any holes using wood putty. Just make sure that the putty matches the flooring. Wipe away any excess.

To fully complete your DIY guide to hardwood installation, you only need to make sure that you practice proper hardwood flooring maintenance.

Common Mistakes in DIY Bathtub Refinishing

Making the choice to go the Do-It-Yourself (DIY) route in bathtub refinishing is commendable. First of all, bathtub refinishing is not a simple process by any means. Not a lot of people would attempt to do it. They wouldn’t want to take such huge risks with their bathtub.

However. There are those who are bold enough to do it. And since you’ve always fancied yourself to be a DIY guy, you’ve decided to go for it. Still, you’ll have to recognize that there’s a danger there. You need to accept the fact that you could make mistakes.

What are those potential mistakes? Take a look at some of the most common mistakes from Bathtub Refinishing Grapevine TX in DIY bathtub refinishing.

Not Preparing the Tub Properly

A lot of DIY practitioners make the mistake of not preparing the tub properly before starting any work on it. There’s actually a lot of work to do before you even get to actually working on the tub. First of all. Make sure that you remove all of the hardware from your tub, such as faucets and drain rings. After the hardware is removed, scrub the tub down thoroughly. Sand the tub with the use of fine-grit sandpaper several times over before cleaning the tub to make sure that there’s no dust or dirt left. All of this is to guarantee that the finish will be very smooth once everything is finished. And it’s part of the preparation before the actual refinishing is done.

Fading

Fading in the color is one of the most common mistakes when it comes to DIY bathtub refinishing. It’s not a good look and certainly would make the tub look as though it hadn’t gone through the refinishing process at all. The possible reason for the fading? It happens when the coating that will be used for refinishing is mixed too thinly. Another possible reason for fading is when the wrong materials are mixed. When the coating is too thinly mixed, then eventually some of the tub’s original surface is going to show. 

Not Enough Drying Time

Another common mistake that’s often made in DIY bathtub refinishing is not allowing for enough drying time. This is what you should do after you’re done with the entire process of preparing your bathtub. It involved cleaning, sanding, and then cleaning again. The bathtub should be given a few hours to dry properly. You’ll have to be absolutely sure that there is no more moisture left as it will likely interfere with the refinishing process and you don’t want that. One possible problem is that the new coating might not even adhere when you apply it. 

Refinishing your own bathtub is not a walk in the park. Even if you’ve got a little experience, it’s still not going to be easy. Mistakes are just waiting to happen and seem to be just around the corner so the need to be extra-careful is huge. Knowing some of the most common mistakes in DIY bathtub refinishing will help you and other homeowners be aware of and capable of avoiding them.

How to Refinish Your Bathtub the DIY Way

Everyone seems to be into DIY these days. DIY, as you probably well know, means Do-It-Yourself and it can be about almost anything. Although it’s usually most used to describe something that’s done within the home. Like fixing your own roof, flooring, or your own bathtub, for example.

Arlington TX Bathtub

Now bathtub refinishing isn’t easy. It’s quite complicated especially for beginners, but then most DIY projects are like that. Anyone who wants to DIY their bathtub refinishing project better be ready for the challenges that it will have. If you want to do it, then you could use some guidance to pull it off.

So here are the steps from Bathtub Refinishing Arlington TX that would ultimately show you how to refinish your bathtub – the DIY way:

Step #1 – Clean the Bathtub

The first step is to make sure that your bathtub is clean. In many ways, this is the most important step since none of the things that you’ll do afterward will matter much if you don’t clean it properly at the start.

To start, remove all of the hardware from the bathtub. Do not forget to include the caulk in the things that you’re going to remove. In order to clean your bathtub as thoroughly as possible, use a decreaser.

Step #2 – Start Repairing the Chips

You’ll need to start repairing the chips in your tub. Since your tub has been in use for years, it’s bound to have chips on it and it could have a lot. 

For the repair, you’ll need to mix a two-part epoxy filler. Mix it until the epoxy is able to form a paste-like consistency. 

Use a putty knife to apply the epoxy in order to fill any chips that your bathtub might have. To remove any excess epoxy, use the putty knife to scrape it away. This will help reduce the sanding time later on.

Step #3 – Take Care of Rough Spots

After the epoxy has hardened, you can start smoothing out any rough spots that you see in the bathtub. Use a utility knife for the purpose. And if you don’t have that, you can also use sandpaper or orbital sander.

Step #4 – Scrub the Bathtub

Time for you to scrub the bathtub. For that purpose, you will need to use either sandpaper or steel wool. Scrub the bathtub three times and in between the scrubbings, vacuum the surface as well.

Step #5 – Cover Some of the Areas

Cover the areas that need to be specifically protected in the bathtub. There are several ways to cover those areas. You could use paper, tape, or a drop cloth for the purpose.

Step #6 – Start Applying the Paint

To get the best results for your bathtub refinishing projects, you will need to apply paint to your bathtub. Use an air compressor to spray paint the bathtub with the color of your choice. If you are not able to spray paint your tub, then using a paintbrush is also an effective way to do it. Apply a second coat after letting the first coat dry for 15 to 20 minutes.

This simple guide on how to refinish your bathtub the DIY way will allow you to do the process correctly and get the results you want.

Pros and Cons of Bathtub Refinishing

You and your bathtub are at an important point in your relationship. After many years of being together, you have to accept the fact that your bathtub is already worn and old. Things can’t continue as they are at present. You’re left with two major options. Either you refinish or you replace your bathtub.

dallas bathtub refinishing
Dallas Bathtub Refinishing

The truth is that you’re favoring bathtub refinishing over replacement. You were of that mind when you found out that the replacement process is going to cost a lot more. That’s why you decided to explore the possibility of refinishing your bathtub more. But you decided that you’d want to look at its pros and cons first.

What are the pros and cons of bathtub refinishing? Check out this article from Bathtub Refinishing Dallas TX which is very helpful. Please read on to find out as we start with the pros.

Pros of Bathtub Refinishing

These are the major reasons why you need to go for bathtub refinishing:

1. Refinishing is More Affordable

Refinishing is the more affordable option, especially when compared to buying a new one. Even though the actual price of a new tub isn’t that high, the entire process of bathtub replacement is what will make it go through the roof. Refinishing will allow you to save a little more when it comes to the costs.

2. You Can Change the Color of Your Bathtub

It’s easy enough to change the color of your bathtub through refinishing. Some colors are no longer in vogue and you want to be more updated. This is particularly true for bathtubs that are quite old. You need an update and refinishing will be able to give it to you.

3. Refinishing Takes Less Time

Refinishing isn’t going to take up too much time. Time is always precious and it needs to be used wisely, even in refinishing your bathtub. It would be done in as fast as a day or two. Replacing your bathtub will take a far longer time than that. So for the sake of convenience, you’d want a much quicker option and that’s refinishing.

Cons of Bathtub Refinishing

On the other hand, these are some of the reasons why you might think twice before going for refinishing:

1. Not Going to Last as Long as a New Bathtub

Refinishing might result in nice-looking tubs but it’s not going to last long. At least, not as long as getting a new one as a replacement. A new one will last for decades while a refinished bathtub is only good for about 10 to 15 years at the most.

2. Uses Harsh Chemicals

Another downside to refinishing is the use of harsh chemicals. Now, this can be a real problem since it can affect a person’s health. When you buy a replacement bathtub, then this issue will not be a problem at all. 

3. Can Only be Done Once

Refinishing can usually happen only once. After that, you’ll likely need to buy a new replacement. Of course, when it comes to replacing your old bathtub, there is no limit to how many times you can do that. You can replace it once every couple of years if you want to.

These are some prime examples of the pros and cons of bathtub refinishing. We can add to this list, but these are some of the most important ones that need to be talked about.

Powered by WordPress & Theme by Anders Norén